Aside from the time travelling
Delorean and coveted hoverboard, the Back To The Future franchise
featured another simpler, yet equally futuristic design - self-tying
laces.
During Back To The Future II, Marty McFly, played by Michael J. Fox, puts on a pair of Nike High Tops that automatically tighten and adjust to fit his feet - using so-called power laces.
Nike released a limited range of McFly's Nike MAGs with manual laces in 2011, and now designer Tinker Hatfield has revealed the power laces will arrive in 2015.
Scroll down for video
During Back To The Future II (1989), Marty McFly, played by Michael J. Fox, puts on a pair of Nike High Tops that automatically tighten and adjust to fit his feet using so-called power laces, pictured
Hatfield made these comments because 2015 was the year Back To the Future II was set in.
Speaking at the Jordan Brand Flight Lab in New Orleans Hatfield told Sole Collector: 'Are we gonna see power laces in 2015? To that, I say yes!'
Rumours about the technology have been circling since 2010 when Nike applied for a patent for 'automatically lacing trainers.'
It said: 'The automatic lacing system provides a set of straps that can be automatically opened and closed to switch between a loosened and tightened position of the upper.
'The article further includes an automatic ankle cinching system that is configured to automatically adjust an ankle portion of the upper.’
The Back To The Future-inspired Nike MAG range was then launched in 2011.
Only 1,500 models of the High Tops were made, and every pair was auctioned off on eBay.
A total of $6million (£3.5million) was raised from the sales of these shoes, and all the proceeds went to the Michael J. Fox Foundation for Parkinson’s Research.
San Francisco-based inventor Blake Bevin has already created her own self-tying laces, a prototype which she says will 'tide you over until Nike comes out with something more polished.'
Using an Arduino microcontroller, Bevin fitted a sensor to a Nike High Top.
When a person steps into the shoe, a force sensor reads the pressure of their foot and activates two servo motors, which apply tension to the laces, tightening the shoe.
A touch switch can be used to reverse the servos.
During Back To The Future II, Marty McFly, played by Michael J. Fox, puts on a pair of Nike High Tops that automatically tighten and adjust to fit his feet - using so-called power laces.
Nike released a limited range of McFly's Nike MAGs with manual laces in 2011, and now designer Tinker Hatfield has revealed the power laces will arrive in 2015.
Scroll down for video
During Back To The Future II (1989), Marty McFly, played by Michael J. Fox, puts on a pair of Nike High Tops that automatically tighten and adjust to fit his feet using so-called power laces, pictured
WHAT ABOUT THE HOVERBOARD?
One
of the most coveted pieces of futuristic tech seen in the Back To The
Future franchise was the hoverboard - a skateboard-style device that can
levitate.
Inspired by this board, a team of Australian inventors designed the Baja board - a four-wheel drive motorised skateboard capable of reaching 31mph (50kmh).
Elsewhere, California-based Future Motion created a self balancing, one wheeled skateboard.
Called the Onewheel, the $1300 gadget can reach speeds on 12mph, and turn 360 degrees within the length of the board.
Inspired by this board, a team of Australian inventors designed the Baja board - a four-wheel drive motorised skateboard capable of reaching 31mph (50kmh).
Elsewhere, California-based Future Motion created a self balancing, one wheeled skateboard.
Called the Onewheel, the $1300 gadget can reach speeds on 12mph, and turn 360 degrees within the length of the board.
Speaking at the Jordan Brand Flight Lab in New Orleans Hatfield told Sole Collector: 'Are we gonna see power laces in 2015? To that, I say yes!'
It said: 'The automatic lacing system provides a set of straps that can be automatically opened and closed to switch between a loosened and tightened position of the upper.
'The article further includes an automatic ankle cinching system that is configured to automatically adjust an ankle portion of the upper.’
The Back To The Future-inspired Nike MAG range was then launched in 2011.
Rumours about the technology have been circling
since 2010 when Nike applied for a patent for 'automatically lacing
trainers'. Nike then released a range of Back To The Future-inspired
High Tops, pictured, in 2011
Only 1,500 models of the Nike MAG High Tops,
pictured, were made, and every pair was auctioned off on eBay. A total
of $6million (£3.5million) was raised from the sales of these shoes, and
all the proceeds went to the Michael J. Fox Foundation for Parkinson's
Research
The announcement about the power laces was made by Nike designer Tinker Hatfield, pictured, yet he did not expand further
Only 1,500 models of the High Tops were made, and every pair was auctioned off on eBay.
A total of $6million (£3.5million) was raised from the sales of these shoes, and all the proceeds went to the Michael J. Fox Foundation for Parkinson’s Research.
San Francisco-based inventor Blake Bevin has already created her own self-tying laces, a prototype which she says will 'tide you over until Nike comes out with something more polished.'
Using an Arduino microcontroller, Bevin fitted a sensor to a Nike High Top.
When a person steps into the shoe, a force sensor reads the pressure of their foot and activates two servo motors, which apply tension to the laces, tightening the shoe.
A touch switch can be used to reverse the servos.
Using an Arduino microcontroller, designer Blake
Bevin has already created a prototype version of a self-tying shoe,
pictured. When a person steps into the shoe, a force sensor reads the
pressure of their foot and activates two servo motors, which apply
tension to the laces, tightening the laces
OMG!!!!
ReplyDelete